Shaping Machine
We are a leading shaper machine manufacturer that caters to all industrial needs with advanced technology to shape materials accurately at faster rates. The popular Shaper Machines is an effective working type of shaper cutting tool that uses linear relative motion. It has the ram moves backward and forwards across the workpiece to finish into flat surfaces. The shaper machine’s surface may be horizontal, vertical, inclined, concave/convex, angular that make grooves, slots, keyways, etc. Thus these machine tools easily attain any desirable shape. The Horizontal shaper type is the common arrangement to get plane surfaces of a work-piece. The ram in the horizontal axis movement is converted into a reciprocating movement to achieve the required successful cutting operation.
| Model | QMT12 | QMT18 | QMT24 | QMT30 | QMT36 | QMT42 | QMT48 |
| Capacity | 12” | 18” | 24” | 30” | 36” | 42” | 48” |
| Length of Ram Stroke | 320 | 500 | 660 | 800 | 930 | 1025 | 1245 |
| Length of Ram | 620 | 1000 | 1225 | 1600 | 1750 | 1900 | 2057 |
| Table | |||||||
| Working Surface of Table | 300*
250 |
450*
300 |
610*
380 |
760*
400 |
900*
450 |
1015*
518 |
1220*
508 |
| Max. Horizontal Table Travel | 300 | 460 | 600 | 700 | 810 | 940 | 1092 |
| Max. Vertical Table Travel | 125 | 330 | 350 | 430 | 500 | 550 | 762 |
| Angular Movement of Table | 60 | 60 | 60 | 60 | 60 | 60 | 60 |
| Tool Head | |||||||
| Max. Vertical Travel of Tool Slide | 125 | 135 | 140 | 160 | 185 | 200 | 200 |
| Max. swivel of Tool Head | 60 | 60 | 60 | 60 | 60 | 60 | 60 |
| Speeds & Feeds | |||||||
| No of Ram Speeds | 3 | 4 | 4 | 4 | 4 | 4 | 4 |
| Diameter of motor pulley | 2.5” | 2.5” | 3” | 3” | 3.5” | 3.5” | 4” |
| Tool head Feed | Hand | Hand | Hand | Hand | Hand | Hand | Hand |
| Electrical Equipment | |||||||
| Main Motor Drive 3 Ph.
RPM |
1 HP
1440 |
1.5 HP
1440 |
2 HP
1440 |
3 HP
960 |
5 HP
1440 |
5 HP
1440 |
5 HP
960 |
| V-Belt Section | B | B | C | C | C | B | B |
- Quite robust and Rigid Construction to Avoid Vibrations.
- The machine is made with Graded casting which is properly seasoned for At least 6 to 8 Months
- Highly accurate as Per IS Standards (IS: 2308: 1989)
- Quick Return Movement to save idle time
- Rocker arm Mechanism Operation
- All Gears are made of EN series Steel, Properly cut on Hobbing and Gear shaper Machines.
- Gears in the machine are properly Hardened and lapped.
- Machine and Gear Box is filled with C-oil.
Standard accessories: Swivelling Vice, Allen key set, V- belt, Crank handle, Spanner set, Screwdriver, Oil can, Motor pulley, Toolbox.
Extra accessories: Electric motor & starter, Keyway cutting attachment, Automatic tool lifting device, Automatic feed to the tool slide, Automatic lubricating pump, Rapid feed system with control panel